One of the smaller examples of our contemporary Gypsum Cornis Strip – click picture for further info example roomset images. Matches with skirting board SX104 and panel railing P5051.
It is essntial to use EXTRA FIX (either FX200 or FX210) when joining two sections together (either corners or on a straight run). This is a high strength ‘superglue’ that will guarantee there won’t be any cracks appearing in future years. The bonded join will actually become stronger than the material itself.
For mounting the coving, we strongly recommend using a silicon based adhesive – FDP700 – especially if any wall or ceiling mounting point has been plastered/skimmed within the last 3 months, or the ambient temperature is less than 10 celcius.
Otherwise the standard water based adhesive FDP500 (cartridge) or FDP600 (tub) should suffice
This Rope pattern premium coving is a revolutionary alternative to traditional plaster coving and wooden mouldings. Manufactured from a lightweight, yet tough and strong resin material which captures the finest detail and is indistinguishable from traditional plaster coving. Our premium coving is much lighter than plaster (gypsum) coving – and much easier to handle and fix. Available in 2.0 meter lengths for easy fixing. Dimensions: 100mm along ceiling x 100mm down wall x 2.0 meter length.
Pre-primed – smooth white undercoat finish accepts all decorative paints.
Hard impact resistant resin material captures the finest detail.
Lightweight and easy to fix
Allows some flexibility when fixing to uneven walls and ceilings.
Will not crack, rot or split easily.
Easy DIY fixing aided by light weight and strength. All mouldings include simple fixing instructions. The resin coving material is sawn easily with a fine saw and mitre block. Alternatively use a circular mitre saw fitted with a suitable blade used for cutting plastic. Resin coving is easily fixed with adhesive, or can be mechanically fixed using conventional nails and screws.
If you need gypsum plaster Cornis Strip decoration and design, you can call us.